Install the CPU Cooler Mounting System
You will need the 2 Mounting Bars and the 4 Bolts from the box marked INTEL.
Screw in the 4 bolts into the 4 screw threads on the Socket frame.
Do not over tighten these 4 bolts!
Place the 2 Mounting Bars over the Bolts.
Orient the Mounting Bars as in the picture below.
The Mounting Bars should curve outwards as shown.
The thread side should face up.
Gather the 4 thumb screws.
Use your #2 Phillips Screwdriver to pick up each thumb screw and fix the two Mounting Bars.
Do not over tighten!
With the 2 mounting boards secured to the Motherboard, you can now test how the CPU Cooler will be held in place.
The CPU Cooler will be held in place by 2 Screws, one on the Left, and one on the Right.
Do not screw in the CPU Cooler yet!!
