Install the Graphics Card
There are 7 slots in the Define R5 Case.
Unscrew and remove the 2nd slot as shown below.
Hold on to this screw.
You will be installing the Graphics Card in the Gray colored slot marked PCIEX16_1.
Push sideways to open the Latch on the right.
Insert the Graphics Card in the Gray Slot.
Push down firmly on both ends until the latch locks in automatically.
Use your #2 Philips Screwdriver to pick up the screw with the magnetized tip.
Screw in the Graphics Card securely in the slot.
Be careful not to drop the screw in the case!
If you do, make sure you retrieve it before proceeding.
This completes your Graphics Card Installation.
Make a note of the four DisplayPorts marked 1, 2, 3, and 4.
When connecting one monitor, use Display Port #1.