The only tool you would need to complete the build is a #2 Phillips Screwdriver with a Magnetic Tip and an 8” long blade.
It is very important to use a Magnetic Tip so that you do not drop any screws inside the case which can be hard to retrieve.
Loose screws left behind can short circuit your Motherboard.
You will use this #2 Phillips Screwdriver to fasten everything unless mentioned otherwise.
The #1 Phillips Screwdriver with a Magnetic Tip and a 6” long blade will only be used under special circumstances.
#2 Phillips Screwdriver with Magnetic Tip
#1 Phillips Screwdriver with Magnetic Tip
